This guide demonstrates how to install and write extensions for kubectl. By thinking of core
kubectl commands as essential building blocks for interacting with a Kubernetes cluster, a cluster administrator can think
of plugins as a means of utilizing these building blocks to create more complex behavior. Plugins extend
kubectl with new sub-commands, allowing for new and custom features not included in the main distribution of
You need to have a working
kubectl binary installed.
A plugin is nothing more than a standalone executable file, whose name begins with
kubectl-. To install a plugin, simply move its executable file to anywhere on your
You can also discover and install kubectl plugins available in the open source using Krew. Krew is a plugin manager maintained by the Kubernetes SIG CLI community.
Caution: Kubectl plugins available via the Krew plugin index are not audited for security. You should install and run third-party plugins at your own risk, since they are arbitrary programs running on your machine.
kubectl provides a command
kubectl plugin list that searches your
PATH for valid plugin executables.
Executing this command causes a traversal of all files in your
PATH. Any files that are executable, and begin with
kubectl- will show up in the order in which they are present in your
PATH in this command’s output.
A warning will be included for any files beginning with
kubectl- that are not executable.
A warning will also be included for any valid plugin files that overlap each other’s name.
It is currently not possible to create plugins that overwrite existing
kubectl commands. For example, creating a plugin
kubectl-version will cause that plugin to never be executed, as the existing
kubectl version command will always take precedence over it. Due to this limitation, it is also not possible to use plugins to add new subcommands to existing
kubectl commands. For example, adding a subcommand
kubectl create foo by naming your plugin
kubectl-create-foo will cause that plugin to be ignored.
kubectl plugin list shows warnings for any valid plugins that attempt to do this.
You can write a plugin in any programming language or script that allows you to write command-line commands.
There is no plugin installation or pre-loading required. Plugin executables receive
the inherited environment from the
A plugin determines which command path it wishes to implement based on its name. For
example, a plugin wanting to provide a new command
kubectl foo, would simply be named
kubectl-foo, and live somewhere in your
#!/bin/bash # optional argument handling if [[ "$1" == "version" ]] then echo "1.0.0" exit 0 fi # optional argument handling if [[ "$1" == "config" ]] then echo "$KUBECONFIG" exit 0 fi echo "I am a plugin named kubectl-foo"
To use the above plugin, simply make it executable:
sudo chmod +x ./kubectl-foo
and place it anywhere in your
sudo mv ./kubectl-foo /usr/local/bin
You may now invoke your plugin as a
I am a plugin named kubectl-foo
All args and flags are passed as-is to the executable:
kubectl foo version
All environment variables are also passed as-is to the executable:
export KUBECONFIG=~/.kube/config kubectl foo config
KUBECONFIG=/etc/kube/config kubectl foo config
Additionally, the first argument that is passed to a plugin will always be the full path to the location where it was invoked (
$0 would equal
/usr/local/bin/kubectl-foo in the example above).
As seen in the example above, a plugin determines the command path that it will implement based on its filename. Every sub-command in the command path that a plugin targets, is separated by a dash (
For example, a plugin that wishes to be invoked whenever the command
kubectl foo bar baz is invoked by the user, would have the filename of
The plugin mechanism does not create any custom, plugin-specific values or environment variables for a plugin process.
An older kubectl plugin mechanism provided environment variables such as
KUBECTL_PLUGINS_CURRENT_NAMESPACE; that no longer happens.
kubectl plugins must parse and validate all of the arguments passed to them. See using the command line runtime package for details of a Go library aimed at plugin authors.
Here are some additional cases where users invoke your plugin while providing additional flags and arguments. This builds upon the the
kubectl-foo-bar-baz plugin from the scenario above.
If you run
kubectl foo bar baz arg1 --flag=value arg2, kubectl’s plugin mechanism will first try to find the plugin with the longest possible name, which in this case
kubectl-foo-bar-baz-arg1. Upon not finding that plugin, kubectl then treats the last dash-separated value as an argument (
arg1 in this case), and attempts to find the next longest possible name,
Upon having found a plugin with this name, kubectl then invokes that plugin, passing all args and flags after the plugin’s name as arguments to the plugin process.
# create a plugin echo -e '#!/bin/bash\n\necho "My first command-line argument was $1"' > kubectl-foo-bar-baz sudo chmod +x ./kubectl-foo-bar-baz # "install" your plugin by moving it to a directory in your $PATH sudo mv ./kubectl-foo-bar-baz /usr/local/bin # check that kubectl recognizes your plugin kubectl plugin list
The following kubectl-compatible plugins are available: /usr/local/bin/kubectl-foo-bar-baz
# test that calling your plugin via a "kubectl" command works # even when additional arguments and flags are passed to your # plugin executable by the user. kubectl foo bar baz arg1 --meaningless-flag=true
My first command-line argument was arg1
As you can see, your plugin was found based on the
kubectl command specified by a user, and all extra arguments and flags were passed as-is to the plugin executable once it was found.
kubectl plugin mechanism uses the dash (
-) in plugin filenames to separate the sequence of sub-commands processed by the plugin, it is still possible to create a plugin
command containing dashes in its commandline invocation by using underscores (
_) in its filename.
# create a plugin containing an underscore in its filename echo -e '#!/bin/bash\n\necho "I am a plugin with a dash in my name"' > ./kubectl-foo_bar sudo chmod +x ./kubectl-foo_bar # move the plugin into your $PATH sudo mv ./kubectl-foo_bar /usr/local/bin # You can now invoke your plugin via kubectl: kubectl foo-bar
I am a plugin with a dash in my name
Note that the introduction of underscores to a plugin filename does not prevent you from having commands such as
The command from the above example, can be invoked using either a dash (
-) or an underscore (
# You can invoke your custom command with a dash kubectl foo-bar
I am a plugin with a dash in my name
# You can also invoke your custom command with an underscore kubectl foo_bar
I am a plugin with a dash in my name
It is possible to have multiple plugins with the same filename in different locations throughout your
For example, given a
PATH with the following value:
PATH=/usr/local/bin/plugins:/usr/local/bin/moreplugins, a copy of plugin
kubectl-foo could exist in
such that the output of the
kubectl plugin list command is:
PATH=/usr/local/bin/plugins:/usr/local/bin/moreplugins kubectl plugin list
The following kubectl-compatible plugins are available: /usr/local/bin/plugins/kubectl-foo /usr/local/bin/moreplugins/kubectl-foo - warning: /usr/local/bin/moreplugins/kubectl-foo is overshadowed by a similarly named plugin: /usr/local/bin/plugins/kubectl-foo error: one plugin warning was found
In the above scenario, the warning under
/usr/local/bin/moreplugins/kubectl-foo tells you that this plugin will never be executed. Instead, the executable that appears first in your
/usr/local/bin/plugins/kubectl-foo, will always be found and executed first by the
kubectl plugin mechanism.
A way to resolve this issue is to ensure that the location of the plugin that you wish to use with
kubectl always comes first in your
PATH. For example, if you want to always use
/usr/local/bin/moreplugins/kubectl-foo anytime that the
kubectl foo was invoked, change the value of your
PATH to be
There is another kind of overshadowing that can occur with plugin filenames. Given two plugins present in a user’s
kubectl plugin mechanism will always choose the longest possible plugin name for a given user command. Some examples below, clarify this further:
# for a given kubectl command, the plugin with the longest possible filename will always be preferred kubectl foo bar baz
Plugin kubectl-foo-bar-baz is executed
kubectl foo bar
Plugin kubectl-foo-bar is executed
kubectl foo bar baz buz
Plugin kubectl-foo-bar-baz is executed, with "buz" as its first argument
kubectl foo bar buz
Plugin kubectl-foo-bar is executed, with "buz" as its first argument
This design choice ensures that plugin sub-commands can be implemented across multiple files, if needed, and that these sub-commands can be nested under a “parent” plugin command:
kubectl-parent kubectl-parent-subcommand kubectl-parent-subcommand-subsubcommand
You can use the aforementioned
kubectl plugin list command to ensure that your plugin is visible by
kubectl, and verify that there are no warnings preventing it from being called as a
kubectl plugin list
The following kubectl-compatible plugins are available: test/fixtures/pkg/kubectl/plugins/kubectl-foo /usr/local/bin/kubectl-foo - warning: /usr/local/bin/kubectl-foo is overshadowed by a similarly named plugin: test/fixtures/pkg/kubectl/plugins/kubectl-foo plugins/kubectl-invalid - warning: plugins/kubectl-invalid identified as a kubectl plugin, but it is not executable error: 2 plugin warnings were found
If you’re writing a plugin for kubectl and you’re using Go, you can make use of the cli-runtime utility libraries.
These libraries provide helpers for parsing or updating a user’s kubeconfig file, for making REST-style requests to the API server, or to bind flags associated with configuration and printing.
See the Sample CLI Plugin for an example usage of the tools provided in the CLI Runtime repo.
If you have developed a plugin for others to use, you should consider how you package it, distribute it and deliver updates to your users.
Krew offers a cross-platform way to package and distribute your plugins. This way, you use a single packaging format for all target platforms (Linux, Windows, macOS etc) and deliver updates to your users. Krew also maintains a plugin index so that other people can discover your plugin and install it.
Alternatively, you can use traditional package managers such as,
on Linux, Chocolatey on Windows, and Homebrew on macOS. Any package
manager will be suitable if it can place new executables placed somewhere
in the user’s
As a plugin author, if you pick this option then you also have the burden
of updating your kubectl plugin’s distribution package across multiple
platforms for each release.
You can publish the source code; for example, as a Git repository. If you choose this option, someone who wants to use that plugin must fetch the code, set up a build environment (if it needs compiling), and deploy the plugin. If you also make compiled packages available, or use Krew, that will make installs easier.
Was this page helpful?
Thanks for the feedback. If you have a specific, answerable question about how to use Kubernetes, ask it on Stack Overflow. Open an issue in the GitHub repo if you want to report a problem or suggest an improvement.